List of Monumental sculpture projects 2015

  • 1 http://swannbb.blogspot.fr/2015/02/sunday-robot-play.html
  • 2 http://shuengitswannjie.blogspot.fr/2015/02/interactive-reading-room-tea-house-2015.html
  • 3 http://swannbb.blogspot.fr/2014/06/neo-ming-bed-luxembourg.html
  • 4 http://swannbb.blogspot.fr/2013/02/yuzi-paradise-tell-moon.html
  • 5 http://swannbb.blogspot.com/2011/09/12th-changchun-international-sculpture.html
  • 6 http://www.saatchionline.com/Shuen-git

Thursday 20 April 2017

eSun Bronze PLA filament / photos in shade and in sunlight

eSun Bronze PLA filament

Found pdf by eSun, there is no metal powder in this pla, it does have additive.
http://www.filimprimante3d.fr/documents/dox/143.pdf





People who saw me printing at the (Ultimaker 2+ extended ) machine all want to know the name of this material.
Its PLA Bronze.  No sure if it does have bronze or not.  Light weight unlike metal.

Since I had done research on metal filaments, proto-pasta iron filled, inox, bronze, copper etc, and watched many videos of various testers on youtube.

So I test printed the material, because of various factors.

#1, I am testing this at faclab Cergy Pontoise, and they are very kind to let me use their machines.
So I got the right nozzle, regular, .4mm, just like for any PLA, manufacture notice says, temperature 180-210, I tested it, best temperature is 193 degree C. on the machine that i used.  Any higher, its quite liquid.  I want the material to come out less splashy.  (photos coming..)

#2, Manufacture notice (somewhere online) I only saw it once, on some page, that it is recommended to print up to 3hr at a time.

#3, after your print, you pass a "cleaning filament" to clear out all leftover bronze dust that might accumulate from the print.  So i checked out what is a "cleaning filament"?  It is a large range filament that can stand from low heat to high heat without burning - so it flushes out the traces of the previous filament, and your colors will be purely the next filament.  You pass a few cm of cleaning filament.
So in fact, if you pass the new filament through until you see totally clean colors, it means, all the dust has gone.  So that is what I will do.




Rule 1: no more than 3hrs w bronze PLA.  (more testing on this, pic coming)
Rule 2: pass new filament for a bit to clear out bronze dust filled filament before starting your new non bronze filled filament.

Here, we have a print with colorfabb olympic gold PLA, see the brim?  The dark edge?  It has small traces of the bronze dust residual in the nozzle and was cleared out.


#4, outcome, looks fabulous, and if it were really bronze filled dust - then it is a kind of bronze.  Though we dont know how much bronze is in the material - in the final print.  But it looks great and no "finishes" fussing afterwards.

Photos in shade





Back side of star, printed at 210 C, see the center of the star, filament melted together in one sheet - a slushy blobby consistency, temperature too hot?  Filament too liquid.

The fatter star behind, printed at 193 C, gd, drier consistency.


There seems to be a few holes on the surface of the star, this could be inconsistancy of the filament itself.  ie. water bubble in the filament.  Or, the file?  To know for sure, I have to print it out at a larger scale and see if holes appear at the same spot.




"Round thread nut and screw" used as print test.  File from thingiverse.  
Nut and Screw adjusted to be printed for 35mm dia.  Temperature 210 C, splashy, very liquid.   Could be interesting for specific effects, ie.melting effects.  Not suitable for a screw and nut intended for normal use.  Not enough precision.



ebronze filled esun filament, printed at 193 C, out put texture consistency I like.  This is the brim, back side of the star pod.











Photos under sunlight







More under sunlight details







Full size model coming soon...

No comments: